About our Hidden Deck Fasteners for PVC Decking Boards
Create the perfect, hidden finish for your PVC Decking project by hiding Screw heads during installation. Our Hidden Deck Fastening system contains 100 stainless steel Screws (65mm), as well as coloured Plugs to suit our Premium PVC Decking Range and Composite Bullnose Boards.
After fixing the Screws into the Boards, gently tap in the Plugs to hide the heads. Cladco Hidden Deck Fasteners are supplied with a T20 Torx drill bit for use with the supplied Screws. This drill bit includes a padded spacer to create a 5mm recess for the Plugs to sit flush with the surface of the Boards.
Screw size: M5x65mm
Plug Height: 5mm
Plug Width: 7mm (tapering to 6mm)
Pack Quantity: 100 Plugs and Screws (with T20 Torx drill bit)
Colours: Black, White, Ash Grey, Ebony/Walnut, Silver Birch, Chestnut and Cedar Wood (See colour chart below for corresponding Plug colours)
Each Screw can be installed easily using a power drill or impact driver, using the supplied drill bit. Screws are manufactured from hard-wearing steel and are long-lasting and rust-resistant.
Please note: These screws are not suitable for Hollow Composite Decking. Images and colours above are used for illustration purposes only. Actual item may vary from the image shown.