If you're looking for a sophisticated and unique exterior to your home, Composite Slatted Cladding is the perfect cladding option. Manufactured from an innovative Capped Composite material that is environmentally friendly, Slatted Panels replicate the look of individual timber slats whilst being easy to install and low-maintenance.
Sometimes referred to as Shadow Gap Cladding, Slatted Cladding Panels can be installed either horizontally or vertically, and are suitable for installations on both domestic and commercial applications – or to simply create a stunning statement wall in your outside living space.
Featuring a four-slat castellation, each of our Slatted Panels gives 200mm coverage when lapped – providing a larger scope than the average slatted board on the market. Cladco also stock a range of Slatted Cladding Trims to seamlessly edge any corners, wall ends, window or door frames.
For further information about our Composite Slatted Cladding - including the uses for each trim, colour variations and installation guidance read more below.
For installation advice, see our Slatted Wall Cladding Installation Guide.
- 2.5m Composite Slatted Wall Cladding PanelsFrom £29.95
- 2.5m Composite Slatted Wall Cladding Single Start Profile TrimFrom £17.94
- 2.5m Slatted Wall Cladding Double End Profile TrimFrom £17.94
- 2.5m Composite Slatted Wall Cladding Corner TrimFrom £17.94
- 2.5m Composite Slatted Wall Cladding External Corner Profile TrimFrom £17.94
- 2.5m Composite Slatted Wall Cladding Internal Corner Profile TrimFrom £17.94
- Composite Slatted Cladding Sample PackFREE
Available Colour Options
Cladco Slatted Cladding Panels and Trims are available in a range of six natural colours to suit any design. These include; Walnut, Teak, Stone Grey, Coffee, Charcoal and Silver Grey
Slatted Cladding Components
The Cladco Capped Composite Slatted Cladding range includes:
Slatted Cladding Panels: Featuring a four-slat castellation, each of our Slatted Wall Cladding Panels provides a 200mm coverage when lapped. Our Panels are a long-lasting, low-maintenance solution to cladding the outside of your home and can be installed both horizontally and vertically, for a contemporary and interchangeable finish.
Corner Trims: Use Corner Trims along the exposed hollow ends of Cladding Panels to create a neat, concealed finish with these L-shaped Trims. Available in the same six natural colours to match your Slatted Cladding Panels.
Internal Corner Trims: Secure Slatted Wall Cladding Panels to the inward corners of a building using our 2.5m Internal Corner Trims. Our Internal Corner Trims sit on top of your Composite or Timber Battens to allow Panels to seamlessly join together.
External Corner Trims: These Trims allow for Cladding Panels to be installed across multiple external walls.
Our External Profile Trims are available in 2.5m lengths and are colour-matched to complement your existing choice of Composite Panels.
Double End Profile Trims: Cladco Double End Profile Trims can be installed along the side edges of your Slatted Wall Cladding to finish off the ends and are manufactured from the same Capped Composite material as Slatted Cladding Boards.
Single Start Profile Trims: Start off your Cladding design with Cladco Single Start Profile Trims. Easy to install using a tongue-over-groove method, Single Start Trims allow you to connect Panels in a run, and can then be finished with a Double End Profile Trim.
Benefits of Composite Cladding Boards
- Low maintenance
- Easy to clean and maintain
- No need to sand, seal or paint
- Six natural colours to choose from, no need for staining or painting
- Resistant to weathering
- Rot and insect resistant
- Can be installed vertically and horizontally
- Environmentally friendly capped composite materials
Our easy Installation Guide will provide you with all the answers and information required to fit your Slatted Cladding to a high standard. The helpful instructions cover how to install your Cladding Boards both horizontally and vertically, as well as the tools and equipment required.
Please note that this is a guide and not definitive instructions. If you require further advice or information, please call us a call on 01837 659901.
You can choose two of the six available colours to review as samples before purchasing. The Sample swatches come with a Cladco Brochure and a Price List.
Are the Panels scratch resistant?
Cladco Slatted Cladding Panels have increased scratch resistance compared with natural Timber due to their Capped Composite material, which increases the durability and should not scratch or mark easily. Boards may still scratch if mishandled.
Do I need planning permission to put my Wall Cladding up?
In most cases, adding Cladding to your home does not require planning permission, providing that the materials are of a similar appearance to the rest of your home.
In some cases, you may need to apply for planning permission if your home is a listed building in an area of exceptional beauty or a national park. Please note that we are not licensed planning or building surveyors. We recommend speaking to a licensed professional.
Can I fit Slatted Cladding Panels on interior projects?
Yes, our Cladding can be used on interior projects, providing the structural integrity of the wall can support the weight of the batten system as well as the Cladding Panels. Alternatively, our 2.4m Slatted Wall Panels are designed specifically for internal use.