Why Choose These Stainless Steel Hidden Decking Clips And Self Tapping Screws?
These stainless steel clips provide a hidden connection between aluminium decking boards by tightly securing into the side grooves of each board, and joining them to the next.
Not only do the clips connect the boards together, they provide a minimal 2mm to 3mm gap and reduce the need for larger T-clip fixings that leave a larger, more obvious gap.
We advise connecting seven clips for every 3.6m aluminium decking board, with clips being supplied in packs of 100.
When you need to firmly secure your decking clips in place, our M4x30 stainless steel self-tapping screws will provide a secure and accurate fit. Each pack contains 100 screws and 100 decking clips. The screws can be installed easily alongside the clips using a PH2 screwdriver bit.
These screws should not rust or corrode once installed. Made from strong and high-quality stainless steel, the fixings will ensure that the aluminium decking boards will not crack or splinter around the screw entry point.
Another advantage of using these screws is that they have a TEK type tip which allows for them to be screwed directly into the board, with no need for pre-drilling a pilot hole.
We recommend one pack per installation project as a guideline, with our handy aluminium decking installation guide available to provide advice when you need it.
Please note: These stainless steel slips and screws are for use on Cladco aluminium decking products only and are not to be used in conjunction with composite or timber decking products.
Looking for starter clips?
See our stainless steel starter clips for aluminium decking
Looking for aluminium structural joists?
See our 4m aluminium decking joist
Or browse our aluminium decking department for decking boards and more…