Some functionality on this website does not support Internet Explorer.For the best experience, please try another browser such as Microsoft Edge, Google Chrome or Mozilla Firefox.
Cladco precision-made plastic Signature composite decking T-clips are tough and durable, making for an effective and accurate installation of your decking boards. The strong stainless steel screws offer increased corrosion and wear resistance, and are countersunk into our T-clips for a professional finish.
Easily fit these clips and screws into the grooves of our Signature composite boards for a consistent installation over a supporting substructure, which can be constructed using our composite joists, recycled plastic joists, or timber joists.
These T-clips will give a 7mm gap between each Signature composite decking board installed to allow for expansion. We advise using a Phillips PH2 impact screwdriver drill bit with the supplied screws for a precise installation.
Please note: Images are used for illustration purposes only. Actual item may vary slightly from image above.
Sample packs are sent via Courier and delivered within 3-5 working days.
Pricing Table
TYPE
WHEN?
HOW MUCH?
National Delivery
(Orders under £1,000)
Estimated 5 working days*
£192.00
(Orders over £1,000)
Estimated 5 working days*
£96.00
(Orders over £1,500)
Estimated 5 working days*
FREE
Scotland Delivery
Postcodes: PA, PH, DD, AB, IV, & KW
Estimated 15 working days*
£360.00
Millboard Delivery
(Orders under £2,000)
Estimated 5 working days*
£192.00
(Orders over £2,000)
Estimated 5 working days*
FREE
Parcelforce Standard (Small Parcels)
3-5 Working Days
£8.50
Parcelforce Standard (Large Parcels)
3-5 working days
£30.00
Sample Packs
5 Working Days
FREE
*Please allow for public holidays and weekends (non-delivery days)
When your goods are delivered these are sometimes delivered on a pallet with the necessary
associated packaging to ensure they arrive with you in the best possible condition. We view the pallet and
packaging as necessary for the protection of the goods and therefore will be a part of what is delivered to you.
It is your responsibility to dispose of these items in a responsible manner when appropriate.
What is the gap created by the T-clips between Signature composite decking boards?
T-clips create a 7mm gap between each board to allow for expansion.
Can I use any type of substructure with Cladco T-clips?
Yes, Cladco T-clips are compatible with substructures made from:
Composite Joists
Recycled Plastic Joists
Timber Joists
Why is it important to double joist and use two clips at adjoining boards?
When our Signature composite decking boards expand and contract, they must be securely fastened to minimise movement. A single joist may not provide sufficient surface area for the ends of two boards to be properly anchored. Using double joists at adjoining points ensures each board end is attached to a joist, increasing the stability of your project. Adjoining boards should never share the same clip, and should be secured using two clips per board end.
This method will improve the structural integrity of your decking; especially in high-stress areas like the ends, where foot traffic, weathering and material contraction or expansion increase the strain on your decking.
Adhering to these guidelines will help ensure proper installation and longevity of your Composite Decking. Failure to follow these guidelines will invalidate the product warranty.
