Why Choose Our 3m Signature Composite Fence Posts?
Signature composite fence posts are a durable and low-maintenance solution for your garden boundary. Made from 60% recycled hardwood fibres and 40% recycled plastic, these wood–plastic composite posts offer long-lasting strength and sustainability.
Resistant to rot, insects, and harsh weather conditions, Cladco composite posts provide a sturdy and attractive fencing solution. Unlike traditional timber, they require no staining, treating, or varnishing - simply clean with warm, soapy water or a pressure washer to keep them looking their best.
Post specifications
Length: 3m
Width: 100mm x 100mm
Weight: 16.5kg
Available in a selection of colours to match our 3.6m Signature composite fencing panels, these posts allow you to coordinate or contrast with your garden design.
Complete the look with our matching Signature composite post caps for a uniform and professional finish.
Looking for an alternative?
Browse our fencing panel post department for more.
Installing Our Composite Fencing Posts
We recommend a maximum total fence length of 15m when using Cladco Signature composite fence posts.
Fence panels can be installed using one of two methods:
Slotting method: Boards are inserted into grooves, after channeling out 20mm.
Face-fix method: Boards are screwed directly to the front of the posts.
For full instructions, please refer to our fencing installation guide.
Tip: Due to manufacturing tolerances, always measure and manually channel out the post rather than relying on the pre-marked lines when using the slot-between method. This step is not needed if face-fixing.
Important Notes
Weather and Wind Exposure: For optimal performance, install in locations with natural shelter from strong wind and prolonged direct sunlight.
Colour Variation: Due to the timber content, natural weathering and colour variation is expected. For consistency, we recommend ordering all posts for your project at the same time.
Wet vs Dry Appearance: Colours may appear different when wet, making tonal variation more noticeable.
Colour Stabilisation: Posts will go through a colour stabilisation process during the first 6 months after installation.
*Cladco composite products are available as FSC® certified at no additional cost. Please specify this when placing your order if required.
Please note: Images are for illustration purposes only. Actual products may vary slightly from those shown.
