Why Choose Our 3m Composite Fence Posts?
Cladco Signature composite fence posts are the perfect choice for creating a strong and secure garden boundary. Manufactured from 60% recycled hardwood fibres and 40% recycled plastic*, these wood–plastic composite posts combine durability with sustainability.
Engineered to match with our Signature composite fencing panels, these posts have no need for staining, treating or varnishing and come in an array of colours to match or contrast the fencing panels.
Post specifications
Length: 3m
Width: 100mm
Thickness: 100mm
Weight: 16.5kg approx.
Colours: Teak, stone grey, coffee, olive green, charcoal
Matching Signature fencing post caps are available to properly finish the fencing project and ensure that the posts are protected from water ingress and potential damage.
When installing your signature fencing system, we recommend a maximum total fence length of 15 metres between posts. Panels can be installed to posts by slotting into the grooves of the post, after channeling out 20mm, or by screwing directly to the front of the post - the decision is yours. For more details and specific instructions, visit our Signature fencing installation guide.
Maintenance is easy! Simply clean with warm soapy water when dirt or staining is present or pressure wash for a more intense clean. Again, see our installation guide for more maintenance information.
Due to the timber content in our Signature composite fence posts, some natural weathering and colour variation is to be expected. To achieve a consistent look, we recommend ordering all posts for your project at the same time, as batch variations may occur.
Colour may appear different when posts are wet vs dry, making any natural variations more noticeable.
Like all composite products, Cladco Signature fence posts go through a colour stabilisation process during the first six months after installation.
*Cladco Composite products are available as FSC® Certified at no additional cost. If FSC® Certified products are required, please specify this when placing your order.
Important: Due to manufacturing tolerances, we recommend measuring and manually channeling out 20mm when installing panels via the slot method, rather than relying on the guidelines on the posts. This does not apply if fixing panels directly to the face of the post.
Images shown are for illustration purposes only. Actual products may vary slightly from those shown.
Looking for composite fencing panels?
See our 3.6m Signature composite fencing panel
Looking for fencing post caps?
See our Signature composite fence post caps
Or browse our composite fencing department for more…
